How to set APN on your Camera?
Method 1：Insert the card into the phone, configure the APN of the card, and then insert the card into the camera.
Method 2：=>Power on the camera Press the "Reset" button for 5-10 seconds. After you hear the device say “system reset” Insert the card in the correct direction.
=>Enter the device's APPClick “Add a device” Then Click “Setup 4G Device”
=>Click “Blue light isn't constantly on? Click here” Click “Setup APN”
=>Click “Setup APN” Enter “linksnet” Click “OK”
=>After configuring the APN If the camera has not detected the card, you can let the device scan the QR code. If the card is detected the card, you can click“ Next”
- APN name: TALKSIM
- APN:unet
- Username and password do not need to be entered
Check Your Data Usage
1. Use your phone camera to scan the Top-Up QR code to
access to main page Or visit the below link on website:
topup.talksimshop.com
2. Fill in the 20 digits lCClD# at the back of the SlM Card
3. Check your live data usage under "My Subscription" page
4. Once your APN setting is completed, your data plan will go to “Active” Page
Data Plan Subscription
1. After you use up the data from the sim card itself, you can choose a new data plan under "Data Plan" page
2. Each data plan is calculated by natural days
3. Support refillable for more service plans in same month, after previous data has run out or expired, your next data plan will be active
4. Cancel auto-subscription data plan under "My Subscription" page